APAO Galaxy by General Membrane
GALAXY is a prefabricated elastoplastomeric-terpolymeric waterproofing membrane, with a compound of distilled bitumen and ethylene-propylene-butene polymers which give the product excellent properties and is reinforced with a rot-proof woven non-woven spunbond polyester stabilized with fibreglass. The excellent quality of the compound gives an exceptional cold flexibility, high resistance to UV rays and longevity and the high quality of the reinforcement avoids shrinkage even in the presence of severe stress. The mineral finishing, available in different colours, gives a better protection to the GALAXY slowing down the ageing process and increasing the life of the system.
Compound APAO
The compound of the GALAXY membranes consists of distilled bitumen modified with amorphous poly-alpha olefins (APAO) and selected stabilized fillers; three properties characterise this compound: resistance to thermal ageing, cold flexibility and heat stability. This compound is extraordinarily resistant to thermal ageing, which lengthens the working life of the membrane. Membranes with high resistance to thermal ageing and excellent dimensional heat stability can be applied in any climatic zone and are especially suited to heavily insulated roofing. The very good cold flexibility makes the membrane easy to apply even in cold climates. Because of its specific formulation, this compound is also highly resistant to the ageing effects of UV radiation and doesn’t footprint easily during application, two essential characteristics for ‘exposed’ roofing where the finished appearance must be impeccable.
 |
Cold flexibility |  |
Excellent |
 |
Heat stability | |
Excellent |
 |
Thermal ageing resistance | |
Excellent |
 |
UV resistance |  |
Very Good |
 |
Resistance to footprinting | |
Excellent |
Reinforcement - Woven non-woven spunbond polyester stabilized with fibreglass (FC)
GALAXY membranes are reinforced with a rot-proof woven non-woven spunbond polyester stabilized with fibreglass. This reinforcement is called “combined” because in addition to the excellent mechanical characteristics of the polyester like tensile strength, elongation and tear resistance you can consider the exceptional heat stability of the fibreglass. This makes GALAXY a very high performance membrane which avoids shrinkage even in the presence of extreme thermal stress. Its heavy duty reinforcement with such strong mechanical characteristics - tensile strength, elongation at break and tear resistance - helps it to absorb the severe stresses due to structural movement, resist foot traffic, the placing of static weights and it permits to be fixed mechanically in zones exposed to high winds.
 |
Dimensional stability | |
Excellent |
 |
Tensile strength | |
Very Good |
 |
Elongation at break | |
Very Good |
 |
Tear resistance |  |
Good |
 |
Static puncture resistance | |
Good |
 |
Ease of detailing | |
Good |
Surfacing
* UV resistance
Since the POLAR compound is virtually unaffected by UV radiation, the membrane can in fact be left without further protection. However the system is also available with the membrane’s upper surface coated with slate flakes that low the membrane’s temperature when exposed to intense sunlight, which in turn all have the effect of slowing down the ageing process, increasing the life of the system.
Non-Stick Finishing |
Mineral |
||
|
UV rays ageing | Very Good |
Excellent |
Standard colors - Mineral slate granules finishing
Even though we have taken the maximum care during the printing process, the colours in the photographs are of course only indicative, and may appear slightly different from the actual mineral surfacing of the membranes.
Brown |
Green |
White |
Dark Grey |
Red |
 |
 |
 |
 |
 |
Fields of Application
GALAXY PLAIN and GALAXY MINERAL membranes can be used as a watertight/finishing layer or as single layer waterproofing systems.
| Galaxy FC180/FC180 Mineral | Galaxy FC180 | ||
 |
Accessible flat roofing |  |
Foundations and underground premises |
 |
Non-accessible flat roofing |  |
Inverted roof |
 |
Vault covering |  |
Bridges and viaducts |
 |
Shed covering |  |
Reservoirs |
 |
Renovation and refurbishment |  |
Car parks |
 |
Metal deck | ||
Technical data sheet
| TECHNICAL CHARACTERISTICS | STANDARD |
| LENGTH | UNI EN 1848-1 |
| WIDTH | UNI EN 1848-1 |
| THICKNESS | UNI EN 1849-1 |
| AERIC MASS | UNI EN 1849-1 |
| HEAT STABILITY | UNI EN 1110 |
| HEAT STABILITY AFTER 6 MONTHS AT 70 °C | UNI EN 1110 |
| COLD FLEXIBILITY | UNI EN 1109 |
| COLD FLEXIBILITY AFTER 6 MONTHS AT 70 °C | UNI EN 1109 |
| DIMENSIONAL STABILITY LONGITUDINAL - TRANSVERSAL | UNI EN 1107-1 A |
| IMPERMEABILITY | UNI EN 1928 |
| TENSILE STRENGTH LONGITUDINAL - TRANSVERSAL | UNI EN 12311-1 |
| ELONGATION AT BREAK LONGITUDINAL - TRANSVERSAL | UNI EN 12311-1 |
| TEAR RESISTANCE LONGITUDINAL - TRANSVERSAL | UNI EN 12310-1 |
| RESISTANCE TO STATIC LOAD | UNI EN 12730 |
| MINERAL ADHESION | UNI EN 12039 |
